Inspection
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the lighting switch of the multifunction switch.
(Refer to the "Multifunction Switch")
|
3. |
With the front fog lamp switch, make sure that continuity exists
between the terminals below.
If continuity is not as specified, replace the multifunction switch.
|
Fog lamp switch |
Removal
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the front bumper.
(Refer to the BD group - "Front bumper")
|
3. |
Remove the front fog lamp connector(A) from the front bumper.
|
4. |
Remove the front fog bulb(A) turning it in the counterclockwise
direction.
|
5. |
Remove the front fog lamp assembly(A).
|
Installation
1. |
Install the front fog bulb.
|
2. |
Reconnect the lamp connector.
|
3. |
Install the front bumper.
|
Anti-lock brake system (ABS)
WARNING
ABS (or ESC) will not prevent accidents due to improper or dangerous driving
maneuvers. Even though vehicle control is improved during emergency braking, always
maintain a safe distance b ...
Concentric Slave Cylinder Assembly. Components and Components Location
Component
1. Concentric slave cylinder assembly
2. Manual transaxle
...
Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should
you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate
the keys easily. Remove t ...