Removal
1. |
Open the fuel filler door, and then remove the filler-neck assembly
mounting screws (A).
|
2. |
Disconnect the fuel filler hose (A) and the ventilation hose (B).
|
3. |
Remove the filler-neck assembly from the vehicle after removing
the bracket mounting bolt (C).
|
Installation
1. |
Installation is reverse of removal.
|
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain
recommended tire inflation pressures and stay within the load limits and weight
distribution recommended for your ...
Power Window Switch. Repair procedures
Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
...
Dimensions Projected
1.
These are the dimensions measured when the measurement points
are projected from the vehicle's surface, and are the reference dimensions
used for used for body ...