Inspection
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the crash pad lower panel.
(Refer to the Body group - "Crash pad")
|
3. |
Remove the crash pad side switch assembly (A).
|
4. |
Check the continuity between the switch terminals as the ESC OFF
switch is engaged.
|
Technical Data
System voltage: DC 12 V Working voltage: DC 10 - 15 V Amperage rating: max.
15 A Suitable for use at temperatures: -22 ~ +158°F (-30 ~ +70°C) Max. working
pressure: 6 bar (87 psi) Size Compresso ...
Fuel Pressure Control Valve. Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve ...
Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram
...