Removal
1. |
Turn ignition switch OFF.
|
2. |
Disconnect the brake tubes from the HECU by unlocking the nuts
counterclockwise with a spanner.
|
3. |
Pull up the lock of the HECU connector (A), and then disconnect
the connector.
|
4. |
Loosen the HECU bracket nuts (A), then remove HECU and bracket.
|
5. |
Remove the 3 bolts, and then remove the bracket from HECU.
|
Installation
1. |
Installation is the reverse of removal.
|
2. |
Tighten the HECU mounting bolts and nuts to the specified torque.
|
3. |
After installation, bleed the
(Refer to ABS bleeding)
|
Trailer towing
We do not recommend using this vehicle for trailer towing. ...
Headlamp welcome function
When the headlight switch is in the ON or AUTO position and all doors (and tailgate)
are closed and locked, if you press the door unlock button on the transmitter (or
smart key), the headlights wi ...
Intake Air Temperature Sensor (IATS). Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute
Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction o ...