Hyundai Veloster: Description and Operation

The Dual Clutch Transmission (DCT) control system measures required data to identify the state of the control target and computes the appropriate compensation value if adjustment is necessary. The actuator is controlled according to the computed compensation value to obtain desired output.

If transmission or driving-performance-related failure is detected, first perform self-diagnosis and basic transmission inspection (oil check).

Then use the diagnostic tool to inspect the transmission control system components.

Dual Clutch Transmission Control System

...

Components and Components Location

Component Location 1. DCT (Dual Clutch Transmission) 2. DCT Control Module 3. Shift Lever 4. Data Link Connector (DLC) ...

See also:

Power Window Switch. Repair procedures
Inspection Power Window Main Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. ...

Automatic climate control system
1. Turn the ignition switch to the ON position. 2. Press the defrost button (). 3. While holding the air conditioning (A/C) button, press the air intake control button at least 5 times within 3 ...

SRS Control Module (SRSCM). Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before b ...