Hyundai Veloster: Description and Operation

The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), ignition lock switch, connection wires and the battery cable.

When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.

The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.

The contacts close and the starter motor cranks. In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.

Starting System

...

Repair procedures

Troubleshooting Starter Circuit The battery must be in good condition and fully charged. 1. Remove ...

See also:

Master Cylinder. Components and Components Location
Components 1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder assembly ...

Multimedia Jack. Repair procedures
Removal 1. Remove the floor console assembly. (Refer to the BD group - "Console") 2. Remove the multimedia jack assembly (A). ...

Bulb wattage
...