Hyundai Veloster Manuals

Hyundai Veloster: Description and Operation - Ignition System - Engine Electrical SystemHyundai Veloster: Description and Operation

Descrition

Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are preprogrammed in the memory of the ECM (Engine Control Module).
The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the ECM. The ignition coil is activated, and timing is controlled.

Ignition System
...

Repair procedures
On-vehicle Inspection Spark Test 1. Remove the engine cover (A). 2. Disconnect the ignition coil connectors (A). ...

See also:

Hands Free Mic. Repair procedures
Inspection 1. Disconnect the negative(-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - "Roof trim") ...

Side repeater light bulb replacement
If the light bulb does not operate, have the vehicle checked by an authorized HYUNDAI dealer. ...

Description and Operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp fo ...

Categories


В© 2011-2024 Copyright www.hvmanual.com