Removal
1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
2. |
Remove the roof trim.
(Refer to the Body group - "Interior")
|
3. |
Disconnect the curtain airbag harness connector (A).
|
4. |
After loosening the mounting bolts remove the curtain airbag.
|
Installation
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Tighten the curtain airbag mounting bolts.
|
4. |
Connect the curtain airbag connector.
|
5. |
Install the roof trim.
(Refer to the Body group - "Interior")
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the curtain airbag (CAB), confirm proper system
operation:
|
Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position. 2. Select desired temperature.
3. Select the or
position. 4. The outside (fresh)
air will be selected automaticall ...
Rear Wheel Speed Sensor. Repair procedures
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Loss of the smart key
A maximum of 2 smart keys can be registered to a single vehicle.
If you happen to lose your smart key, you will not be able to start the engine.
You should immediately take the vehicle and remainin ...