Removal
1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
2. |
Remove the roof trim.
(Refer to the Body group - "Interior")
|
3. |
Disconnect the curtain airbag harness connector (A).
|
4. |
After loosening the mounting bolts remove the curtain airbag.
|
Installation
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Tighten the curtain airbag mounting bolts.
|
4. |
Connect the curtain airbag connector.
|
5. |
Install the roof trim.
(Refer to the Body group - "Interior")
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the curtain airbag (CAB), confirm proper system
operation:
|
General Information
General
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying ...
Description and Operation
Description
Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by gas from
releasing into the atmosphere. T ...
Power Window Motor. Repair procedures
Inspection
Front Power Window Motor Inspection
1.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
2.
...