Replacement
1. |
Using a screwdriver or remover, remove the wiper
arm cover (A).
|
2. |
Remove the wiper arm mounting hole plug (B).
|
3. |
After loosening the mounting nuts, then remove the
wiper arm (A).
|
4. |
Remove the washer nozzle hose (B).
|
5. |
Detach the clips, then remove the cowl top cover
(A).
|
6. |
Installation is the reverse of removal.
|
Sunglass holder
To open the sunglass holder, press the cover and the holder will slowly open.
Place your sunglasses in the compartment door with the lenses facing out. Push to
close.
WARNING
• Do not kee ...
Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
...