Removal
|
1. |
Disconnect the push rod from the master cylinder by removing the
snap pin (A) and washer (B).
|
2. |
Remove the battery and ECM.
(Refer to "Manual transaxle system" in MT group)
|
3. |
Disconnect the clutch tube (B) and reservoir hose (A) from the
clutch master cylinder.
|
4. |
Remove the clutch master cylinder assembly (A) by turning it clockwise.
|
Installation
1. |
Installation is in reverse order of removal.
|
Gear Actuator Motor > Description and Operation
Description
The gear actuator motor is mounted on the complete shaft.
The gear actuator motor comprises the shift motor and select motor.
The gear actuator shift motor and select motor rec ...
Fuel Pressure Control Valve. Schematic Diagrams
Circuit Diagram
...