Inspection
1. |
Turn off the ignition switch.
|
2. |
Disconnect the clutch motor connector.
|
3. |
Measure the resistance on the clutch motor terminal.
|
4. |
Refer to the specifications and check that the measured resistance
is as specified.
|
Removal
1. |
Remove the following parts first:
|
2. |
Disconnect the clutch actuator motor connector (A).
|
3. |
Loosen the mounting screw, and then remove the clutch actuator
motor (A).
|
Installation
1. |
Installation is the reverse of removal.
|
Identification Number Description
Vehicle Identification Number
1.
World Manufacturer Identifier (WMI)
A.
KMF : Commercial vehicle (Van)
B.
...
ESC Control Module. Components and Components Location
Components
1. Front - left tube
2. Rear - right tube
3. Rear - left tube
4. Front - right tube
5. MC2
6. MC1
7. ESC control module (HECU)
8. Damper
...
Side impact air bag
Your vehicle is equipped with a side impact air bag in each front seat. The purpose
of the air bag is to provide the vehicle's driver and/or the front passenger with
additional protection th ...