1. Before closing the hood, check the following:
• All filler caps in engine compartment must be correctly installed.
• Gloves,
rags or any other combustible material must be removed from the engine compartment.
2. Return the support rod to its clip to prevent it from rattling.
3. Lower the hood until it is about 1 ft. (30 cm) above the closed position and let it drop. Make sure that it locks into place.
WARNING
Console. Repair procedures
Replacement
Floor Console Replacement
[M/T]
•
A plastic trim tool is recommended, ...
Roof Trim. Repair procedures
Replacement
Sunvisor Replacement
•
Use a plastic panel removal tool to remove
interior t ...