Hyundai Veloster Manuals

Hyundai Veloster: Checking Cables And Wires - General InformationHyundai Veloster: Checking Cables And Wires

1.
Check the terminal for tightness.
2.
Check terminals and wires for corrosion from battery electrolyte, etc.
3.
Check terminals and wires for open circuits.
4.
Check wire insulation and coating for damage, cracks and degrading.
5.
Check the conductive parts of terminals for contact with other metallic parts (vehicle body and other parts).
6.
Check grounded parts to verify that there is complete continuity between their attaching bolt(s) and the vehicle's body.
7.
Check for incorrect wiring.
8.
Check that the wiring is so clamped to the prevent contact with sharp corners of the vehicle body, etc. or hot parts (exhaust manifold, etc.)
9.
Check that the wiring is clamped firmly to provide enough clearance from the fan pulley, fan belt and other rotating or moving parts.
10.
Check that the wiring has a little space so that it can vibrate between fixed and moving parts such as the vehicle body and the engine.

Measurement Point
Measurements should be taken at the center of the hole. ...

Check Fuses
A blade type fuse test taps provided to allow checking the fuse itself without removing if from the fuse box. The fuse is good if the test lamp lights up when one lead is connected to the tes ...

See also:

Special Service Tools
Special Service Tools Tool (Number and Name) Illustration Use 09546-26000 Strut spring compressor Compression of co ...

Windshield Glass. Repair procedures
Replacement Removal • Put on gloves to protect your hands. ...

Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to perform. As explained earlier in this section, several procedu ...

Categories


В© 2011-2024 Copyright www.hvmanual.com