Hyundai Veloster Manuals

Hyundai Veloster: Back-up Lamp Switch. Repair procedures - Manual Transaxle Control System - Manual Transaxle System (M6CF1)Hyundai Veloster: Back-up Lamp Switch. Repair procedures

Inspection

1.
Disconnect the back up lamp switch connector (A).

2.
Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
3.
If necessary, repair or replace the backup lamp switch.


Replacement

1.
Disconnect the back up lamp switch connector (A).

2.
Remove the back up lamp switch (A).

3.
Replace a new one and install the back up lamp switch.

Tightening torque:
29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)


Back-up Lamp Switch. Specifications
Specifications 1. Working voltage: DC 10~15V 2. Operating force: 3.0kg Max. 3. Voltage drop: - 0.4V ...

Driveshaft and axle
...

See also:

Starting the engine
WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots, etc.) may interfere with your ability to use the brake, accelerator and clutch pedal (i ...

Description and Operation
Description EPS (Electric power steering, Column assist type) system uses an electric motor to assist the steering force and it is an engine operation independent steering system. EPS ...

Gear Actuator Motor > Description and Operation
Description The gear actuator motor is mounted on the complete shaft. The gear actuator motor comprises the shift motor and select motor. The gear actuator shift motor and select motor rec ...

Categories


В© 2011-2024 Copyright www.hvmanual.com