Hyundai Veloster Manuals

Hyundai Veloster: AVN Remote Control. Repair procedures - AVN System - Body Electrical SystemHyundai Veloster: AVN Remote Control. Repair procedures

Inspection

1.
Check the audio remote control switch (A) for resistance between connector terminals in each switch position.
[LH-AUDIO]

[RH-TRIP]

[Audio]
Switch
Connector terminal
Resistance
(±5%)
Seek up
3-5
430 Ω
Seek down
3-5
1.11 kΩ
Mode
3-5
2.11 kΩ
Volume up
3-5
4.61 kΩ
Volume down
3-5
6.81 kΩ

[Cruise]
Switch
Connector terminal
Resistance
(±5%)
ON/ OFF
3-4
880 Ω
Cancle
3-4
180 Ω
SET -
3-4
330 Ω
SET +
3-4
550 Ω

[Bluetooth + Voice]
Switch
Connector terminal
Resistance
(±5%)
Voice
3-4
10.71 kΩ
End of call
3-4
18.91 kΩ
Send
3-4
40.91 kΩ

[Trip + Reset]
Switch
Connector terminal
Resistance
(±5%)
Trip
3-4
2.54 kΩ
Reset
3-4
5.54 kΩ


Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group - "Driver airbag module and clock spring")
3.
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
4.
Remove the steering wheel cover (A) after loosening 4 screws.

5.
Remove the steering wheel remote control switches connectors.
[LH-Audio/ Bluetooth + Voice]

[RH-Cruise/ Trip + Reset]

6.
Remove the wiring and loosen 5 screws.
7.
Remove the steering wheel remote control switch assembly (A).

8.
Remove the bluetooth switch and the trip switch (A) after loosening the screws.


Installation

1.
Install the steering wheel remote control switch.
2.
Install the steering wheel cover.
3.
Install the steering wheel.
4.
Install the driver airbag module.
Make sure the audio remote control switch and the airbag module connectors are plugged in properly.

AVN Remote Control. Schematic Diagrams
Circuit Diagram ...

Multimedia Jack. Schematic Diagrams
Circuit Diagram ...

See also:

To set cruise control speed:
1. Press the cruise ON/OFF button on the steering wheel, to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which mus ...

CVVT Oil Control Valve (OCV). Specifications
Specification Item Specification Coil Resistance (Ω) 6.9 ~ 7.9 [20°C(68°F)] ...

CVVT (Continuously Variable Valve Timing) System. Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated ...

Categories


© 2011-2024 Copyright www.hvmanual.com