Hyundai Veloster Manuals

Hyundai Veloster: Automatic climate control system - Windshield defrosting and defogging - Features of your vehicleHyundai Veloster: Automatic climate control system

To defog inside windshield

To defog inside windshield

1. Select desired fan speed.
2. Select desired temperature.
3. Press the defroster button (will turn on according to the detected ambient temperature, outside (fresh) air).
4. The air-conditioning will turn on according to the detected ambient temperature, outside (fresh) air position and higher fan speed will be selected automatically.
5. If blower fan speed is low, the blower fan speed will be set middle speed automatically.

If the air-conditioning, outside (fresh) air position and higher fan speed are not selected automatically, adjust the corresponding button or knob manually.

If the fan speed is controlled to higher fan speed. position is selected, lower fan speed is controlled to higher fan speed.

To defrost outside windshield

To defrost outside windshield

1. Set fan speed to the highest position.
2. Set temperature to the extreme hot (HI) position.
3. Press the defroster button (4. The air-conditioning will turn on according to the detected ambient temperature).
4. The air-conditioning will turn on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.
5. If the air-conditioning, outside (fresh) air position and higher fan speed are not selected automatically, adjust the corresponding button or knob manually.

If the fan speed is controlled to higher fan speed. position is selected, lower fan speed is controlled to higher fan speed.

Manual climate control system
To defog inside windshield 1. Select any fan speed except “0” position. 2. Select desired temperature. 3. Select the or position. 4. The outside (fresh) air will be selected automaticall ...

Defogging logic
To reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position.To canc ...

See also:

Mic. Repair procedures
Inspection 1. Disconnect the negative(-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - "Roof trim") ...

Engine number
The engine number is stamped on the engine block as shown in the drawing. ...

Luggage net (holder)
To keep items from shifting in the cargo area, you can use the holders located in the cargo area to attach the luggage net. CAUTION To prevent damage to the goods or the vehicle, care should be ...

Categories


© 2011-2024 Copyright www.hvmanual.com