Inspection
Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the auto light sensor (A) from crash pad upper side by
using screw (-) driver.
|
3. |
Remove the auto light connector.
|
Installation
1. |
Reconnect the auto light connector.
|
2. |
Install the auto light sensor.
|
Technical Data
System voltage: DC 12 V Working voltage: DC 10 - 15 V Amperage rating: max.
15 A Suitable for use at temperatures: -22 ~ +158°F (-30 ~ +70°C) Max. working
pressure: 6 bar (87 psi) Size Compresso ...
ETC (Electronic Throttle Control) System. Description and Operation
Description
The Electronic Throttle Control (ETC) System consists of a throttle body
with an integrated control motor and throttle position sensor (TPS). Instead
of the traditional throttle ...
Speed sensing door lock system
All doors will automatically lock after the vehicle speed exceeds 15 km/h. For
deactivation of this feature, contact an autherized HYUNDAI dealer. ...