Hyundai Veloster: Anchor Pretensioner (APT). Description and Operation

Front anchor pretensioner operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver seat and it is an equipment to make up for the existing short stroke. Front anchor pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver and passenger from breaking away doubly as seat belt is being pulled toward anchor side after a collision.

Seat Belt Pretensioner (BPT). Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the seat belt afte ...

Anchor Pretensioner (APT). Components and Components Location

Components ...

See also:

Starter
Repair procedures Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refe ...

Repair procedures
Inspection Self Diagnosis With GDS Smart key system defects can be quickly diagnosed with the GDS. The GDS operates actuator quickly to monitor, input/output value and self diagnosis. T ...

Remote keyless entry system operations
Lock (1) All doors are locked if the lock button is pressed. If all doors, trunk and hood are closed, the hazard warning lights will blink once to indicate that all doors are locked. Also, if ...